Discover the Key Facts
Type of structure
Universal (US)
Module Direction
South (S)
Module Layout
Vertical (V)
Installation Instructions
Long Side (LA)
Mounting surface
Concrete, ceramics, silicate
Design Description
A multi-component facade system made of Magnelis™ sheet metal, designed for use on substrates of aerated concrete, ceramic, or silicate, and further insulated with wool or polystyrene foam.
A system designed for facades where the choice of structure is based on the inability to install the system on the roof or on the ground.
An invasive system consisting of adjustable brackets that are mounted to the facade using screws of the appropriate length; profiles are then attached to these brackets, from which the PV modules—previously equipped with appropriate angle-bracket mounts—are suspended.
The structure was designed to minimize the time required to install the base while keeping the number of attachment points to the facade to a minimum.
A universal mounting system consisting of adjustable, telescoping components that allow the structure to be used with modules of varying power and size.
A multi-component facade system made of Magnelis™ sheet metal, designed for use on substrates of aerated concrete, ceramic, or silicate, and further insulated with wool or polystyrene foam.
A system designed for facades where the choice of structure is based on the inability to install the system on the roof or on the ground.
An invasive system consisting of adjustable brackets that are mounted to the facade using screws of the appropriate length; profiles are then attached to these brackets, from which the PV modules—previously equipped with appropriate angle-bracket mounts—are suspended.
The structure was designed to minimize the time required to install the base while keeping the number of attachment points to the facade to a minimum.
A universal mounting system consisting of adjustable, telescoping components that allow the structure to be used with modules of varying power and size.
At the customer’s request, our Technical Department recalculates the load on the facade for each installation using this structure, as well as the method and number of mounting points used to install the profiles to which the modules are attached
1
2
3
4
Download as a PDF
Download the Product Sheet
WATCH THE ANIMATION
1
Wall-mounted console
2
Mounting rail for the module
3
Mounting rail
4
Mounting Bracket
Product Specifications
FA-US-S/V/LA/CCS
Type of construction
Facade (FA)
Type of structure
Universal (US)
Module Orientation
South (S)
Module Layout
Vertical (V)
PV Module Installation Procedure
Long Side (LA)
Mounting surface
Concrete, Ceramics, and Silicates (CCS)
Module Type
Standard/Bifacial
Minimum number of PV modules
1
Height of standard clamps (mm)
35
Thickness of standard clamps (mm)
5
Maximum length of a PV module (mm)
–
Distribution Method
In stock
Structural Base Components
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
SM10X20Z
Other Mounting Components
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
50 Universal Center Clip, Nature/Black
KLSR50ALN
KLSR50ALCZ
Back to the list
Contact our expert
Do you have another question?