Otwiera się w nowej karcie

FR-B-PS-EW/H/LA/MAX-LONG-X

Ballast System for Flat Roofs

Discover the Key Facts

Type of structure
Design (PS)
Module Direction
East-West (EW)
Module Layout
Level (H)
Installation Instructions
Long Side (LA)
Max module length
Individual (X)

Design Description

A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A customizable photovoltaic system that allows for the design of panels at any angle of inclination.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load and the amount and placement of ballast.
The ability to customize the size of the structure to fit the size of the panels.
Thanks to the way the panels are supported, they are much more resistant to wind pressure and suction.
A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A customizable photovoltaic system that allows for the design of panels at any angle of inclination.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load and the amount and placement of ballast.
The ability to customize the size of the structure to fit the size of the panels.
Thanks to the way the panels are supported, they are much more resistant to wind pressure and suction.
1
2
3
3
WATCH THE ANIMATION
1
Base of a point ballast
2
Basis
3
Long arm
3
Long arm

Product Specifications

FR-B-PS-EW/H/LA/MAX-LONG-X

Roof Type

Flat roof (FR)

How to Install the Structure on the Roof

Ballast structure (B)

Type of structure

Design (PS)

Module Orientation

East-West (EW)

Module Layout

Level (H)

PV1 Module Installation Instructions

Long Side (LA)

Application/surface on which it is installed

PVC membrane/bituminous membrane

How to Assemble the Structure

The structural base is placed on the roof deck and then further weighted down with concrete blocks placed on the ballast platform

Does the design require additional ballast?

Yes

Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel and any additional ballast (kg/m²)2

~

Purlin Length (mm)

Without purlins

How to Install Clamps

Clamps mounted on the triangle

Maximum length of a PV module (mm)³

Individual (X)

Distribution Method

Custom design made to order with a lead time of up to 4 weeks for modules with the length specified in the product sheet sent for a quote

Structural Base Components

M8x100 Allen screw, DIN 912 A2
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
M10X20 TZN Hex Head Screw
SM10X20Z
M8 Self-Locking Nut, DIN 985 A2
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
M10 TZN Hex Nut
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
Basis
Basis
Omega Support (Base for Ballast Blocks)
Omega Support (Base for Ballast Blocks)
RBTSOLAR-KD-PB
Long arm
Long arm
DN 440R M8 A2 Washer
DN 440R M8 A2 Washer
ISO 7093 M8 TZN Washer
ISO 7093 M8 TZN Washer

Other Mounting Components

End Clamp 30/32/35/40 Nature/Black
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
M8x35 A2 Allen screw
M8x35 A2 Allen screw
SIM8X35A2
M8 Serrated Flange Nut, DIN 6923 A2
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
Back to the list
Contact our expert
Do you have another question?
Ask our expert