Otwiera się w nowej karcie

FR-B-US-EW/H/SA/MAX-LONG2100

Ballast System for Flat Roofs

Discover the Key Facts

Type of structure
Universal (US)
Module Direction
East-West (EW)
Module Layout
Level (H)
Installation Instructions
Short side (SA)
Max module length
2100 (max-long2100)

Design Description

A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load as well as the quantity and placement of ballast.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load as well as the quantity and placement of ballast.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
1
2
3
3
4
WATCH THE ANIMATION
1
Base of a point ballast
2
Basis
3
Long arm
3
Long arm
4
Factory-drilled holes for mounting optimizers

Product Specifications

FR-B-US-EW/H/SA/MAX-LONG2100

Roof Type

Flat roof (FR)

How to Install the Structure on the Roof

Ballast structure (B)

Type of structure

Universal (US)

Module Orientation

East-West (EW)

Module Layout

Level (H)

PV1 Module Installation Instructions

Short side (SA)

Application/surface on which it is installed

PVC membrane/bituminous membrane

How to Assemble the Structure

The structural base is placed on the roof deck and then further weighted down with concrete blocks placed on the ballast platform

Does the design require additional ballast?

Yes

Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel and any additional ballast (kg/m²)2

~

Purlin Length (mm)

Without purlins

How to Install Clamps

Clamps mounted on the triangle

Maximum length of a PV module (mm)³

2100 (max-long2100)

Distribution Method

Universal design available in stock

Structural Base Components

Universal East-West Triangle
Universal East-West Triangle
RBTSOLAR-FR-US-EW
Omega Support (Base for Ballast Blocks)
Omega Support (Base for Ballast Blocks)
RBTSOLAR-KD-PB
M8 Self-Locking Nut, DIN 985 A2
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
A2 8.4 Round Washer, DIN 125A
A2 8.4 Round Washer, DIN 125A
PPM8A2
M8x100 Allen screw, DIN 912 A2
M8x100 Allen screw, DIN 912 A2
SIM8X100A2

Other Mounting Components

End Clamp 30/32/35/40 Nature/Black
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
50 Universal Center Clip, Nature/Black
50 Universal Center Clip, Nature/Black
KLSR50ALN
KLSR50ALCZ
M8 Serrated Flange Nut, DIN 6923 A2
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
M8x35 Allen screw, DIN 912 A2
M8x35 Allen screw, DIN 912 A2
RBTSOLAR-KD-W-2175/2355/2703
Back to the list
Contact our expert
Do you have another question?
Ask our expert