Discover the Key Facts
Type of structure
Universal (US)
Module Direction
South (S)
Module Layout
Level (H)
Installation Instructions
Long Side (LA)
Max module length
Individual (X)
Design Description
A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to the use of cutouts adapted to different panel mounting methods (short and long sides).
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load and the amount and placement of ballast.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
A multi-piece ballast system made of Magnelis sheet metal, designed for flat roofs.
A system designed for flat roofs where the primary criterion is the inability to use a welded membrane.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to the use of cutouts adapted to different panel mounting methods (short and long sides).
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
A non-invasive system based on a structure that must be weighted down with the appropriate number of ballast blocks in accordance with the ballast plan.
Systems with a capacity exceeding 50 kWp are always recalculated by the technical department to determine the roof load and the amount and placement of ballast.
It is recommended that the ballast system be recalculated each time to ensure it is suitable for use on a given flat roof, taking into account wind zones and loads.
1
2
3
4
5
Download as a PDF
Download the Product Sheet
WATCH THE ANIMATION
1
Base of a point ballast
2
Basis
3
Long arm
4
Short-side top telescope
5
Short-side top telescope
Product Specifications
FR-B-US-S/H/LA/MAX-LONG-X
Roof Type
Flat roof (FR)
How to Install the Structure on the Roof
Ballast structure (B)
Type of structure
Universal (US)
Module Orientation
South (S)
Module Layout
Level (H)
PV1 Module Installation Instructions
Long Side (LA)
Application/surface on which it is installed
PVC membrane/bituminous membrane
How to Assemble the Structure
The structural base is placed on the roof deck and then further weighted down with concrete blocks placed on the ballast platform
Does the design require additional ballast?
Yes
Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel and any additional ballast (kg/m²)2
~
Purlin Length (mm)
Without purlins
How to Install Clamps
Clamps mounted on the triangle
Maximum length of a PV module (mm)³
Individual (X)
Distribution Method
Universal design available in stock
Structural Base Components
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
SM10X20Z
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
Short-side top telescope
Short-side bottom telescope
Long arm
DN 440R M8 A2 Washer
ISO 7093 M8 TZN Washer
Basis
Omega Support (Base for Ballast Blocks)
RBTSOLAR-KD-PB
Other Mounting Components
Wind Brace, South Support, L=X
RBTSOLAR-KD-W-X
M8x35 A2 Allen screw
SIM8X35A2
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
Back to the list
Contact our expert
Do you have another question?