Otwiera się w nowej karcie

FR-S-US-S/H/LA/MAX-LONG-X

A structure bolted to a flat roof

Discover the Key Facts

Type of structure
Universal (US)
Module Direction
South (S)
Module Layout
Level (H)
Installation Instructions
Long Side (LA)
Max module length
Individual (X)

Design Description

A multi-part structure made of Magnelis sheet metal, designed for flat or sloped roofs, without the need for a welded structure or additional ballast.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
An invasive installation system, involving attachment to the roof substructure using an appropriate number of screws.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
A multi-part structure made of Magnelis sheet metal, designed for flat or sloped roofs, without the need for a welded structure or additional ballast.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
An invasive installation system, involving attachment to the roof substructure using an appropriate number of screws.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
1
2
3
4
WATCH THE ANIMATION
1
Basis
2
Long arm
3
Short-side top telescope
4
Short-side top telescope

Product Specifications

FR-S-US-S/H/LA/MAX-LONG-X

Roof Type

Flat roof (FR)

How to Install the Structure on the Roof

Bolted construction (S)

Type of structure

Universal (US)

Module Orientation

South (S)

Module Layout

Level (H)

PV1 Module Installation Instructions

Long Side (LA)

Application/surface on which it is installed

PVC membrane/bituminous membrane/sandwich panel/trapezoidal sheet metal

How to Assemble the Structure

The structural base is attached to the roof substructure

Does the design require additional ballast?

No

Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel and any additional ballast (kg/m²)2

~

Purlin Length (mm)

Without purlins

How to Install Clamps

Clamps mounted on the triangle

Maximum length of a PV module (mm)³

2100 (max-long2100)

Distribution Method

Universal design available in stock

Structural Base Components

M8x100 Allen screw, DIN 912 A2
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
M10X20 TZN Hex Head Screw
SM10X20Z
M8 Self-Locking Nut, DIN 985 A2
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
M10 TZN Hex Nut
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
Short-side top telescope
Short-side top telescope
Short-side bottom telescope
Short-side bottom telescope
Long arm
Long arm
DN 440R M8 A2 Washer
DN 440R M8 A2 Washer
ISO 7093 M8 TZN Washer
ISO 7093 M8 TZN Washer
Basis
Basis

Other Mounting Components

Wind Brace, South Support, L=X
Wind Brace, South Support, L=X
RBTSOLAR-KD-W-X
M8x35 A2 Allen screw
M8x35 A2 Allen screw
SIM8X35A2
M8 Serrated Flange Nut, DIN 6923 A2
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
End Clamp 30/32/35/40 Nature/Black
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
Back to the list
Contact our expert
Do you have another question?
Ask our expert