FR-A-W-US-S/H/LA/MAX-LONG-X
Welded structure for flat roofs
Download as a PDF
Download the Product Sheet
Discover the Key Facts
Type of structure
Universal (US)
Module Direction
South (S)
Module Layout
Level (H)
Installation Instructions
Long Side (LA)
Max module length
Individual (X)
Design Description
A multi-piece welded aluminum structure designed for flat roofs, requiring no additional ballast.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted within a range of 10–25 degrees, in 5-degree increments
Designed for roofs where there is insufficient load-bearing capacity for traditional solutions based on Magnelis.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Hybrid system – in areas of the roof that are particularly susceptible to wind suction, it is possible to increase the number of welded joints.
A non-invasive system based on a structure attached to the roof deck by welding appropriately sized patches of bituminous or PVC/TPO membrane
Systems with a capacity exceeding 50 kWp are reviewed on a case-by-case basis by the technical department to assess the roof load as well as the number and placement of the mounting bases.
The structural base was designed in collaboration with membrane roofing specialists to ensure quick installation and maximum resistance to tearing.
A multi-piece welded aluminum structure designed for flat roofs, requiring no additional ballast.
For south-facing structures, a wind brace is required to limit the effect of wind on the structure and increase its rigidity.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted within a range of 10–25 degrees, in 5-degree increments
Designed for roofs where there is insufficient load-bearing capacity for traditional solutions based on Magnelis.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Hybrid system – in areas of the roof that are particularly susceptible to wind suction, it is possible to increase the number of welded joints.
A non-invasive system based on a structure attached to the roof deck by welding appropriately sized patches of bituminous or PVC/TPO membrane
Systems with a capacity exceeding 50 kWp are reviewed on a case-by-case basis by the technical department to assess the roof load as well as the number and placement of the mounting bases.
The structural base was designed in collaboration with membrane roofing specialists to ensure quick installation and maximum resistance to tearing.
1
2
3
4
5
6
7
8
Download as a PDF
Download the Product Sheet
WATCH THE ANIMATION
1
structural channel
2
trapezoidal bracket
3
welded base
4
channel section for a welded base
5
swivel bracket
6
cable tray mounting
7
"High" adjustable bracket
8
"Low" adjustable bracket
Product Specifications
FR-A-W-US-S/H/LA/MAX-LONG-X
Roof Type
Flat aluminum roof (FR-A)
How to Install the Structure on the Roof
Welded construction (W)
Type of construction
Universal (US)
Module Orientation
South (S)
Module layout in
Level (H)
PV1 Module Installation Instructions
Long Side (LA)
Application/Surface on Which It Is Installed
PVC membrane/bituminous membrane
Method of Assembling the Structure
The base of the structure is welded to the roof surface
Does the design require additional ballast?
No
Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel (kg/m²)2
2,71
Purlin Length (mm)
Without purlins
Wind vane length (mm)
2175
Maximum length of the PV module (mm)³
Individual (X)
Distribution Method
In stock
Structural Base Components
Trapezoidal Bracket
RBTSOLAR-KD-AL-WT
Swivel Bracket
RBTSOLAR-KD-AL-WO
Low-profile adjustable bracket
RBTSOLAR-KD-AL-WRN
Welded base channel
RBTSOLAR-KD-AL-CPZ
High-Adjustable Bracket
RBTSOLAR-KD-AL-WRW
Structural rail
RBTSOLAR-KD-AL-SK
Mounting the cable tray
RBTSOLAR-KD-MK
Welded base for a support
RBTSOLAR-KD-PZ
ST4.8X9.5-C-S Self-Tapping Screw
WK4.8X9.5A2
M10X20 Hammer Head Screw
SMM10X20A2
M10 Flange Nut
NKM10A2
M10 A2 Washer
PSZM10A2
M10 A2 Hex Nut
NM10A2
M10x20 A2 Hex Head Screw
SM10x20A2
Other Mounting Components
Regupol
KD-GW-6/8.5/100-SAM
Wind Brace, South Support, L=X
RBTSOLAR-KD-W-X
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
M8 A2 Hex Nut
NM8A2
M8x35 A2 Allen screw
SIM8X35A2
Back to the list
Contact our expert
Do you have another question?