FR-W-US-EW/H/SA/MAX-LONG2100
Welded structure for flat roofs
Download as a PDF
Download the Product Sheet
Discover the Key Facts
Type of structure
Universal (US)
Module Direction
East-West (EW)
Module Layout
Level (H)
Installation Instructions
Short side (SA)
Max module length
2100 (max-long2100)
Design Description
A multi-piece system made of Magnelis™ sheet metal, designed for flat roofs, with no need for additional ballast.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Developed in collaboration with specialists in the field of membrane roofing installation.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Its unique shape is designed to significantly reduce installation time and maximize the force required to pull the base out.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
Non-invasive installation using heat-welding technology with a so-called heat gun (for PVC) or a gas torch (for bituminous roofing felt). High durability of the heat-welded system
Only one welded base is required per support for proper installation.
This has been confirmed by specialized laboratory tests.
A multi-piece system made of Magnelis™ sheet metal, designed for flat roofs, with no need for additional ballast.
A universal photovoltaic mounting system that allows the tilt angle of the modules to be adjusted between 10 and 15 degrees.
Developed in collaboration with specialists in the field of membrane roofing installation.
The consistent availability of parts in stock ensures fast and efficient order fulfillment.
Its unique shape is designed to significantly reduce installation time and maximize the force required to pull the base out.
Ready for use with modules up to 1134 mm wide, of varying power ratings and lengths, thanks to cutouts designed to accommodate different panel mounting orientations (short and long sides)
Non-invasive installation using heat-welding technology with a so-called heat gun (for PVC) or a gas torch (for bituminous roofing felt). High durability of the heat-welded system
Only one welded base is required per support for proper installation.
This has been confirmed by specialized laboratory tests.
1
2
3
3
4
Download as a PDF
Download the Product Sheet
WATCH THE ANIMATION
1
Welded base
2
Basis
3
Long arm
3
Long arm
4
Factory-drilled holes for mounting optimizers
Product Specifications
FR-W-US-EW/H/SA/MAX-LONG2100
Roof Type
Flat roof (FR)
How to Install the Structure on the Roof
Welded construction (W)
Type of structure
Universal (US)
Module Orientation
East-West (EW)
Module Layout
Level (H)
PV1 Module Installation Instructions
Short side (SA)
Application/surface on which it is installed
PVC membrane/bituminous membrane
How to Assemble the Structure
The base of the structure is welded to the roof surface
Does the design require additional ballast?
No
Approximate weight of the structure per 1 m² of installation, excluding the weight of the panel and any additional ballast (kg/m²)2
~
Purlin Length (mm)
Without purlins
How to Install Clamps
Clamps mounted on the triangle
Maximum length of a PV module (mm)³
2100 (max-long2100)
Distribution Method
Universal design available in stock
Structural Base Components
Universal East-West Triangle
RBTSOLAR-FR-US-EW
Welded base for a support
RBTSOLAR-KD-PZ
M8 Self-Locking Nut, DIN 985 A2
NSHM8A2
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
A2 8.4 Round Washer, DIN 125A
PPM8A2
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
SM10X20Z
Other Mounting Components
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
50 Universal Center Clip, Nature/Black
KLSR50ALN
KLSR50ALCZ
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
M8x35 Allen screw, DIN 912 A2
RBTSOLAR-KD-W-2175/2355/2703
Back to the list
Contact our expert
Do you have another question?