Discover the Key Facts
Type of structure
Individual (I)
Module Direction
East-West (EW)
Module Layout
Level (H)
Number of supports
Three-legged
Number of modules
3×3 + 3×3 (+6)
Design Description
A multi-section ground structure made of Magnelis™ sheet metal, designed for use in the ground and installed using piles—no additional ballast required.
Prior to production, the PZT must be provided along with the module installation instructions and geotechnical specifications, including pile test results.
Ideal for constructing structures above 50 kW that require a building permit and whose components need to be optimized based on the structure's foundation location.
A system designed for ground installations where, due to severe geotechnical conditions (e.g., dolomite-rich soils), it is necessary to use two-part piles, including a lower pile with increased strength (CW profile) for piling in rocky soils.
An assembly system consisting of individually selected structural components, including purlins, transoms, and legs, which allows the structure to be used only for predetermined modules and their sizes.
The option to use a hybrid system in which the leg(s) can be weighted with ballast in areas where it is not possible to drive them to a specific depth.
The bolting system used to assemble the purlins, transoms, and legs requires no maintenance as long as installation is performed in accordance with the instructions.
A multi-section ground structure made of Magnelis™ sheet metal, designed for use in the ground and installed using piles—no additional ballast required.
Prior to production, the PZT must be provided along with the module installation instructions and geotechnical specifications, including pile test results.
Ideal for constructing structures above 50 kW that require a building permit and whose components need to be optimized based on the structure's foundation location.
A system designed for ground installations where, due to severe geotechnical conditions (e.g., dolomite-rich soils), it is necessary to use two-part piles, including a lower pile with increased strength (CW profile) for piling in rocky soils.
An assembly system consisting of individually selected structural components, including purlins, transoms, and legs, which allows the structure to be used only for predetermined modules and their sizes.
The option to use a hybrid system in which the leg(s) can be weighted with ballast in areas where it is not possible to drive them to a specific depth.
The bolting system used to assemble the purlins, transoms, and legs requires no maintenance as long as installation is performed in accordance with the instructions.
We recommend that every structure to be manufactured be reviewed in advance by our Technical Department to ensure it is suitable for installation in a specific wind and snow zone, based on previously assessed geotechnical conditions.
This design is intended for specific, predefined wind and snow zones, as well as a custom-selected pile depth. To initiate production, a prepayment is required, the amount of which is specified in the offer.
1
2
3
4
5
Download as a PDF
Download the Product Sheet
WATCH THE ANIMATION
1
Bolt
2
Purlin
3
Long Leg
4
Zastrzał
5
Short leg
Product Specifications
G-P-I-EW/H/3/3×3-3×3
Type of substrate
Soil (S)
How to Assemble the Structure
Pile Foundation (P)
Type of structure
Individual (I)
Module Orientation
East-West (EW)
Module Layout
Level (H)
Number of supports
3
Number of PV modules
3×3 + 3×3 (+6)
Module Type
Standard/Bifacial
The shape of the pole
Single-piece leg – C profile / Two-piece leg – CW profile
Does the design require additional ballast?
No
Is it possible to use a hybrid solution (piling + ballast)?
Yes—the option to add additional ballast
Minimum number of modules on the structure
18
Height of standard clamps (mm)
35
Thickness of standard clamps (mm)
5
Maximum PV module size (mm)
–
Distribution Method
Made to order
Structural Base Components
M10 TZN Hex Nut
NM10Z
M10 300HV Washer, ISO 7093-1 TZN
PSZM10Z
M8x100 Allen screw, DIN 912 A2
SIM8X100A2
M10X20 TZN Hex Head Screw
SM10X20Z
Other Mounting Components
End Clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
50 Universal Center Clip, Nature/Black
KLSR50ALN
KLSR50ALCZ
M8 Serrated Flange Nut, DIN 6923 A2
NKM8A2
CW-profile split leg
Zastrzał
Back to the list
Contact our expert
Do you have another question?